The selectivity of triethylene glycol modified glassy carbon electrode for charged and uncharged pieces

A triethylene glycol modified glassy carbon electrode(TEG–GCE) was fabricated by a controlledpotential electrolysis procedure. The performance of the film on the modified electrode surface was investigated by cyclic voltammetry with different probes. It was firstly found that while neutral pieces could penetrate the TEG film on the GCE surface, the ionic pieces, whatever it is anion or cation, was blocked by the film. This property was successfully used for determining dopamine(DA) in the presence of ascorbic acid(AA) with differential pulse voltammetry(DPV).     

Non‐Covalent Functionalization of Graphene with Bisphenol A for High‐Performance Supercapacitors

The reduced graphene oxide (RGO)/bisphenol A (BPA) composites were prepared by an adsorption‐reduction method. The composites are characterized by X‐ray diffraction (XRD), UV‐vis, thermogravimetric (TG) analysis, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM). The results confirm that BPA is adsorbed on the basal plane of RGO by π‐π stacking interaction. Furthermore, the electrochemical behaviors were evaluated by cyclic voltammetry, galvanostatic charge/discharge techniques and electrochemical impedance spectroscopy (EIS). The results show that the RGO/BPA nanocomposites exhibit ultrahigh specific capacitance of 466 F·g^?1 at a current density of 1 A·g^?1, excellent rate capability (more than 81% retention at 10 A·g^?1 relative to 1 A·g^?1) and superior cycling stability (90% capacitance decay after 4000 cycles). Consequently, the RGO/BPA nanocomposites can be regarded as promising electrode materials for supercapacitor applications.     

Triterpenoids and phenolics from the fruiting bodies of Inonotus hispidus and their activations of melanogenesis and tyrosinase

Two new 24-methyl lanostane triterpenoids,hispindic acids A and B(1 and 2),and a new phenolic compound,hispinine(7),along with nine known compounds(3-6,and 8-12),were isolated from the fruiting bodies of Inonotus hispidus.Their structures were elucidated based on the extensive analysis of spectroscopic data(NMR and HRMS).Hispindic acid A(1) possesses an unusual formyl group at C-30.Compounds 1,3-4,and 8 showed stronger activate abilities of melanogenesis and tyrosinase in B16 melanoma cells than those of positive control,8-methoxypsoralen,at 50 μmol/L     

Design,synthesis and insecticidal activities of novel anthranilic diamides containing polyfluoroalkyl pyrazole moiety

In order to discover new molecules with good insecticidal activities, a series of anthranilic diamides containing polyfluoroalkyl pyrazole were designed and synthesized, and their structures were characterized by ¹H NMR and HRMS. Bioassays demonstrated that some of the title compound exhibited excellent insecticidal activities. The larvicidal activities of compound 8a, 8c, 8g, 8k and 8l against Mythimna separata Walker were 100% at 0.8 mg/L. The insecticidal activities of compound 8a, 8c, 8e, 8g, 8k and 8l against Plutella xylostella Linnaeus were 100% at 0.4 mg/L. Surprisingly compounds 8a and 8c still showed 100% larvicidal activities against Plutella xylostella Linnaeus at 0.08 mg/L comparable to the commercialized Chlorantraniliprole. The LC₅₀ of compound 8a and 8c against M. separata is 0.048 and 0.043 mg/L respectively.     

Shape change of calcite single crystals to accommodate interfacial curvature: Crystallization in presence of Mg2+ ions and agarose gel-networks

Synthetic calcite single crystals,due to their strong crystal habit,tend to grow into characteristic rhombohedra.In the nature,biogenic calcite crystals form composites together with biomacromolecular materials,spurring investigations of how the growing calcite single crystals change their habit to satisfy the curvature of the organic phase.In this work,we examine calcite crystallization on a flat surface of glass slide and a curved surface of polystyrene(PS)sphere.The crystals exhibit tiny contact area onto the glass substrate that is averagely only 15% of their projected area on the substrate.In sharp contrast,the contact area greatly increase to above 75% of the projected area,once magnesium ions or agarose gel networks are introduced into the crystallization media.Furthermore,the calcite crystals form rough and step-like interfaces with a curved surface.However,the interfaces become smooth and curved as the crystals grow in presence of magnesium ions or agarose gel networks.The discrepancy between the interfacial structures implies kinetic effects of the additives on the crystallization around the surfaces. This work may provide implications for understanding the formation mechanisms of single-crystal composite materials.     

Solvent effect in polymer analysis by MALDI-TOF mass spectrometry

Solvent effect is one of the important factors in sample preparation which may affect matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra of synthetic polymers. MALDI imaging, a useful imaging tool for discovering biomarkers in tissues, is applied here for better comprehension of solvent effect in polymer analysis by MALDI-TOF mass spectrometry. Nylon-6 was chosen as a model polymer for the study of solvent effect. Its MALDI mass spectra in different solvents were performed. MALDI imaging analysis was performed for studying the incorporation of analytes into matrix crystals in different solvent combinations. Specifically, the colocalization of matrix and analyte was obtained through Pearson’s correlation (PC) coefficient analysis of their MALDI images. The results demonstrated that satisfactory spectra were obtained in higher PC value conditions. PC decreased along with an increase in the ratio of poor solvent, which suggested that we should minimize the poor solvent ratio to obtain better MALDI spectra.     

Facile one-step extraction and oxidative carboxylation of cellulose nanocrystals through hydrothermal reaction by using mixed inorganic acids

A facile and efficient approach to prepare carboxylated cellulose nanocrystals (CCNCs) is presented through a novel one-step hydrothermal procedure by using a mixed acid system of hydrochloric acid and nitric acid (HCl/HNO₃). The as-prepared cellulose nanoparticles were characterized by scanning electron microscopy, wide angle X-ray diffraction, conductometric titrations, Fourier transform infrared spectrometry and thermal gravimetric analysis. The results showed that the combination of the mixed acid and hydrothermal reaction can speed up the process of CCNC preparation, and then high quality of the product could be obtained at relatively low acid concentration. It is found that the addition of nitric acid could not only promote the conversion of surface groups on the cellulose nanocrystals (CNCs), but also have significant influences on the yield, particle size and microstructure of CNCs. For the volume ratio of HCl/HNO₃ of 7:3, the as-prepared CCNCs exhibited the largest length to diameter ratio and narrowest dimension distributions as well as maximum degree of oxidation of 0.12. In addition, high dispersion stability for the CCNCs could be observed due to the existence of negative carboxyl groups. This approach based on one-step oxidative carboxylation greatly simplified the preparation of CCNCs with high yield and high crystallinity under mild hydrothermal condition.     

Sensitive voltammetric method for the fast analysis of the antioxidant pyrogallol using a boron-doped diamond electrode in biofuels

A sensitive voltammetric method for the determination of pyrogallol (PY) was developed employing a boron-doped diamond electrode (BDDE). The composition of the supporting electrolyte was investigated during the development of the methodology. Linear sweep voltammetry (LSV) under the optimized experimental conditions was applied for PY determination with a limit of detection and limit of quantification of 0.85 and 2.82 μmol L^?1, respectively. These values are satisfactory for application to real samples. The usability of this method for the quantification of pyrogallol was in range from 2.82 to 296.00 μmol L^?1. Finally, the developed method was successfully used for the analysis of real samples of biodiesel produced from rapeseed oil and its blend with diesel fuel. Samples of biodiesel and biodiesel blends were analyzed directly in an electrochemical cell, while samples with very low concentrations of PY in biodiesel were extracted with water using the proposed simple and fast process.     

Preparation and CO2 capture properties of nanocrystalline Li2ZrO3 via an epoxide-mediated sol–gel process

Journal of Sol-Gel Science and Technology - Nanocrystalline lithium zirconate (Li2ZrO3) was successfully prepared by an epoxide-mediated sol–gel process. The compositions and morphologies of...     

聚羟基丁酸酯/碳纳米管复合纳米纤维膜的制备及其对重金属离子吸附分离性能的研究

以聚羟基丁酸酯和碳纳米管为原料,采用三氯甲烷/二甲基甲酰胺混合溶液为溶剂,利用静电纺丝技术制备了聚羟基丁酸酯/碳纳米管复合纳米纤维膜.研究了碳纳米管的含量对纳米纤维膜形貌和力学性能的影响,探讨了复合纳米纤维膜对重金属Cu(II)、Cd(II)和Pb(II)的吸附特性.实验结果表明:加入1 wt%碳纳米管能够将纳米纤维的平均直径从(728±146)nm降低至(468±89)nm,纳米纤维膜的比表面积从27.24 m~2/g提高至43.45 m~2/g;碳纳米管的复合能够有效增强聚羟基丁酸酯纳米纤维,当碳纳米管含量1 wt%为最佳,拉伸强度可达5.85 MPa,较纯聚羟基丁酸酯纳米纤维提升了115%.复合纳米纤维膜对重金属离子具有良好的吸附特性,其对Cu(II)、Cd(II)和Pb(II)的最佳吸附pH值为5,此时最大吸附容量分别为91.04、171.05和197.03mg/g,平衡吸附时间分别约为50、60和60 min,吸附率分别为1.79、2.83和3.28 mg/g/min;热力学和动力学分析表明,复合纳米纤维膜对重金属Cu(II)、Cd(II)和Pb(II)的吸附行为更符合Freundlich模型,吸附过程更符合Pseudo-second order模型;循环使用实验表明,重复使用5次后,其吸附容量可保持在初始值的87%以上,具有较好的使用寿命.